ACS has worked on commercial jobsites all over Texas and surrounding states. We have done countless floor leveling jobs, epoxy coatings and other specialty finishes. .
On the Argo project in San Antonio, ACS worked with Intertech Flooring and Structure Tone Southwest to level 4 floors of a high rise building. This project was filled with challenges and I would be willing to bet that only a handful of contractors could pull off this scope of work in the allotted time.
The floor was out of level as much as 2″ in several areas. The specified product was a self-leveling underlayment from Mapei so ACS went to work shooting grades and setting up a plan that would bring the floor within tolerance of the finished floor goods. ACS had to begin stocking at night so we were able to pour during the day. Because the project was in the middle of downtown San Antonio, ACS had to bring a pump onto the 13th floor and pump to the 10th, 11th and 12th floors in addtion to a small area on 13.
Because of product specifications, ACS was forced to pour in two lifts. We set the dept of topping and poured the deep fill one day and then primed and poured the second lift on the next.What we were able to achieve was a floor that was flat and within a strict floor tolerance. We installed more than 11,000 bags of material over 67,000 square feet on 4 floors. General Contractor and flooring contractor lauded ACS for its professionalism and performance in tough conditions. Mark Jones with Intertech Flooring said “You guys are great. We appreciate the way you handled the project in downtown SA. Not always an easy task. ACS made us look good.” Mark and the rest of the Intertech team need no help looking good but we really appreciate the kind words!